We release WWAuditor-PRO 1.2 build 7602,308 For those unfamiliar with the suite of Windows Wireless Audits can only tell them to have open discussion topics on my personal website or consult lampiweb.com where can sum it all up again .. is the less complex although WWAuditor-PRO for whom familiar with Windows audits will be extremely easy to use. ***************************************************************************************************************************** Before you begin a) install the driver (as an adapter). That is pretty much commented thus we refer to other tutorials .. Atherors: Tutorial ERW 2.7.1 on Windows 7 RTL: News: RTL8187 working with all Windows Aircrack suite YouTube VideoWatch this video on YouTube. Note: Remember that if the driver for ERW, WifiConector, WWA LITE, Aut-Hanshake 'GUI have already installed no need to reinstall it, but need to install IF you do not have .. for example if you are running ERW not need to install the driver for ATH but if the RTL or if you have installed the RTL and do NOT have installed Atheros must do. Once the driver installed Very Important: Before using WWAuditor-PRO is necessary to set Steps to follow to the letter: menu (Windows icon above left)> Support> config Configuration panel is displayed configure options that are accurate ( all ) SAVE CPU / GPU SAVE SHOW. SAVE RTL-MAC SAVE ATH-MAC CFG OCLHASHCAT CFG WHIRESHARK Step 1 configure the ATH / RTL / NDIS version so select one of the two and then we click on SAVE SHOW. WWAuditor-PRO saves changes, just shut down and restart note. The NDIS option has not yet implemented the monitor mode, capture etc .. so it is only valid with menu options that do not include this. In any case you can work perfectly with her face to the encryption options, oclhashcat, programs and utilities .. If you have no adapter or ATH RTL support you must limit yourself to this option. Step 2 Configure oclHashcat for 1st use, so we click on CFG OCLHASHCAT .. this process decompresses the paqute of oclHashcat and prepares it for use for the 1st time. Weather descomprir dajarlo the complete package and ready to use will depend on the characteristics of the PC with which you work, when the process (showing the decompression process) we alert you. If the current version will stop working due to an update by the boys oclhashcat suffice only download the new version and copy it to the following (NADA more) route and we will do the 2nd step (click OCLHASHCAT CFG) WWAuditor-PRO \ program \ wwa-config \ config-restore \ In this case WWAuditor-PRO will detect that there is a previous version and ask us if we want to eliminate that will answer .. IF and only have to wait. Step 3 Configure wireshark CFG WHIRESHARK click here and we see the process but we also warn the end, the process to follow is identical to the previous .. WWAuditor-PRO \ program \ wwa-config \ config-restore \ .. and also in the event that there is an update package will copy this to the path and WWAuditor-PRO will detect that there is a previous version and ask us if we want to eliminate it .. will reply that IF and only have to wait. Step 4 depending on which version to use RTL or ATH we click on SAVE RTL-MAC / SAVE ATH-MAC this is to save the MAC adapter configuration and load it into the mac .. fake field in the case of RTL false mac can not be changed due to the limitations of the driver but the ATH with mac changer then we can do it. note: if you choose the NDIS option we'll skip this step. 5th step and finally SAVE CPU / GPU return to the main menu with <- and indicate that we want to save default settings for the PRO-WWAuditor load when .. Y CUDA GPU for example, so we must check both boxes and then return to menu> support> config and saved changes SAVE with CPU / GPU Whenever you start WWAuditor-PRO display the choices we make as default but we can change them whenever we want, either temporarily or fixed. Temporarily and to understand would be the case of a "session" open-PRO WWAuditor in which we have already indicated the defaults on these boot is nothing but .. just in the setup menu select or deselect for new configuracón for example to use CPU only and is NOT necessary or re-start or anything while open "session" can change as often as we, that if .. to logout and restart will start with we have fijdado as default obviously we can also change the default chosen by another passing SAVE performing CPU / GPU again. and this is all on the subject of main configurations. For the record saying that the driver libusb for RTL8187L (read initial post or theme of the forum) used ONLY used for audits (monitor, capture and injection) ie can NOT use the adapter to surf with that driver. The alternatives are: leave that adapter only to audit create two partitions on your Windows PC with two OS and only use one of them to audit use a virtual machine freeze the OS with an application like Toolwiz Time Freeze (free) ***************************************************************************************************************************** changelog Code: Select All suppressed applications WirelessNetView Newest from Nirsoft: Wininfoview 1.61 NirSoft WirelessNetConsole WifiChannelMonitor of Nirsoft cat grep of Coeman: Pipe to oclHascat WG4Crack + / aircrack-ng luckyPIN ciphers Added support for Belkin router Added support WPS TRENDnet Added support WPS luckyPIN Update generic PIN improvements test_handsahke auto_handshake wpaclean Right to left writing implemented dashboard restructuring main panel restructuring the dropdown menu (all three) Added new fields such as WPS, Pattern Router, RSSI, frequency (in MHZ) Channel new fields to save and load (files menu) new fields for config several source codes mejordos bug (s) fixed CPU intensive router-maker in XP in rutades.exe restore-default in userdb - empty fields other (small bug's) Application Updates 1 betra3 aircracknew-ng rev. 2410 aircrack-ng suite? 3 1 aircrack-ng airdecap-ng airdecloak-ng airolib-ng ivstools kstats makeivs-ng wpaclean 1.3 BrutusHack Coeman76 - Fixed bug when restarting in to fit TP-Link - Fixed bug when restarting session rebound Linksys & D-Link - Fixed bug when restarting session in WLAN-00 attack: 19:15 wpspin07 (betis-jesus) Dumpper 60.02 (SkyWacther) GenMundoR (dabyd64) program sub-folder updates OUI.txt (15/07/14) wpspin07 WifiChannelMonitor 1.01 (x86 / x64) WiFiInfoView 1.61 Dumpper 60.2 Added folder "license" sub-folder program \ config-restore cudaHashcat-1.21 oclHashcat-1.21 QSS Utility TL-WN721N WinPcap JumpStart sub-folder program \ config-restore \ several move here Timeout_Patch of oclHascat Network Monitor 3.4 (all. Exe available) NM34_ia64 NM34_x64 NM34_x86 Two new listbox (list of networks) Win Vista and one for top and one for suppressing the above XP own dependencies rutains rutades Disclaimer Hash file: WWAuditor-PRO-1.2.rar CRC32: B16330AB MD5: 063C611CB85152DB8857B01B69FCC7C9 SHA-1: 41017B196CA693E35532E857D5EA106382484523 WWAuditor-pro.exe CRC32: F74A6F26 MD5: F0101A4F29F67A0D77C756F3B8B4520E SHA-1: 7D47A9A0C2333E5A3A10EC715B363E746F7DD6C0 official download official thread tutorial + help have a nice day..! lampiweb.com team
You should read the post that is in the link .. basically to use aircrack need a compatible adapter for other applications or for generating dictionary will need .cap
