me try run bully 4.7.2..but why ping same look pic..cant help me --- Double Post Merged, 17 Sep 2013 --- info my wifi WiFiSKY" BLACK KING 2000mW with 10dbi Antenna 802.11 b/g WIFI Wireless Network Adapter 200mw WIFISKY adopts Realtek RTL8187L+RTL8225-VF Chipset and high power amplifier to enhance product performance.The setting of external omni-directional 6DB antenna enables WIFISKY Adapter to receive stronger signal.In case of installing shield,it completely avoids the strong radiation from high-power adapter,as it greatly improves stability. Product Features: Power about 10 times than the ordinary one's; 2.The furthest transmission distance is 4000meters(Outside Test Distance), 3.The driver supports 24 languages; 4.Supporting Win98,2000,XP,Vista,Win7 and MAC. Product Parameters: 1. Standard: IEEE 802.11b/g 2. Interface: USB 2.0/1.1 3. Frequency: 2.412GHZ ~2.484GHZ unlicensed ISM band 4. Main chip: RTL8187L 5. Reception range: Test distance 4000 meters,Actual use according to the surrounding environment 6. Modulation: IEEE 802.11bBPSK/DQPSK/CCK,IEEE 802.11g:BPSK,QPSK,16QAM,64QAM 7. Transmission rate: IEEE 802.11b:1,2,5,5 ,11Mbps,IEEE 802.11g:6,9,12,18,24,36,54Mbps 8. Security: WEP (64/128/256bit),WPA,WPA-PSK,WPA2 TKIP/AES , WPA2-PSK 9. Antenna: 6DBI RP-SMA 10. Application system: Windows 98SE,Me,2000,XP,windows7, Vista ,MAC,Linux 11. Transmission power: 27dBm ± 1dBm 12. Receiver sensitivity: Operating at 11Mbps:< , 54Mbps:< 13. Size: 8.5cm*5.8cm*1.8cm 14. Weight: 58g 15. Temperature: -10 ~ 55 Celsius 16. Humidity: 10 ~90% (non-condensing) 17. Certification: FCC,CE
must be the humidity if your off 1 % u could explode ok in all seriousness does the router have a block command ? such as you may try a pin 20 times then you have to wait 1 hr or 20 hrs or whatever? this could be the issue check into it.
@estimacamry did some comparisons with performance with Bully v Reaver. Seems like Bully has some issues. Not sure where the post is but check his posts in his profile
I have tried Bully on 15+ networks and it just repeats pins, timeout, EAPFail or WPSfail. It has been completely useless.
Reaver is far better, making sure your close to the AP is important. I had no issue with Reaver working when the signal is at around 60-db. This might be a bit off topic but, WPA/WPA2 via WPS is now un hackable. You can do a WPS attack as newer routers just constantly do a WPS lock, No matter what command or set the pin delay, it's impossible. Well, it's a good thing though, less cyber crime, etc.
