Hi everyone , i was wonder if anyone could share some information in how to setup the power on rtl8187 configuration . From brand to brand i get different values . These are the values i put now on my alfa036H When i loaded eprom values from my crotalus wifi card i got instead 55 was CD . The card is working , but my objective is to get it to 27dbm , and i have no clue how to do it . Are the values in decimal and must be converted to hex ? like 270 = 10E (epprom does not accept 3 characters) Example , my crotalus had CD = 205 , but that card can go up to 27dbm according to manufacturer . Anyone have any idea how to configure it ? --- Double Post Merged, 25 May 2016, Original Post Date: 24 May 2016 --- Well , i was reading in other topics here and it looks that the best configuration is to place "FF" in all channels tx power , and change the chaanel plan to MKK1 . I notice some differences in RX signal , however i will try the tx power over some far wifi APS here .