Issue Not allowed to browse in the internet

Discussion in 'Xiaopan Support' started by xrafael95x, 20 Jun 2014.

  1. xrafael95x

    xrafael95x Member

    Joined:
    18 Jun 2014
    Messages:
    6
    Likes Received:
    0
    Hey guys, i need help with this issue, i cracked a wep wifi, then i introduce the password in windows 7, says connected but seems like doesn't have internet. I thought that this could happen so then i cracked another one and have the same error. What this might happen? Do Am i missing something?
     
  2. Demosthenes

    Demosthenes Well-Known Member
    VIP

    Joined:
    16 Apr 2014
    Messages:
    83
    Likes Received:
    53
    Can you ping out? ping 74.125.239.136 then if that works try ping google.com and see if it resolves to the same IP address.
    If not it could be it is not resolving DNS, static assign your DNS to the google public ones 8.8.8.8 and 8.8.4.4 see if that works. You can use any DNS server, it does not matter all it does is resolve your domain names to ip addresses
     
  3. xrafael95x

    xrafael95x Member

    Joined:
    18 Jun 2014
    Messages:
    6
    Likes Received:
    0
    OK when i ping out gave this

    ping 74.125.239.136
    PING 74.125.239.136 (74.125.239.136) 56(84) bytes of data.
    From 192.168.2.1 icmp_seq=1 Destination Net Unreachable
    --- 74.125.239.136 ping statistics ---
    38 packets transmitted, 0 received, +24 errors, 100% packet loss, time 37098ms

    i think the error is in the DNS. i did what you say about the google dns but i still have the same problem
     
  4. Demosthenes

    Demosthenes Well-Known Member
    VIP

    Joined:
    16 Apr 2014
    Messages:
    83
    Likes Received:
    53
    192.168.2.1 is most likely the router and it is not allowing pass through. What is the IP address of your computer? You may have to static assign your Computer IP to match one the router would hand out. Can you login to the router?
    If so check its IP out the address for it and subnet mask. Your subnet has to math the one on the router, the router address would be your gateway. It may not be handing out DHCP, check to see it that is enabled.
     
  5. xrafael95x

    xrafael95x Member

    Joined:
    18 Jun 2014
    Messages:
    6
    Likes Received:
    0
    Thanks for your help bro is really appreciated, i logged in into the router setup page i disable dhcp but i still don't have internet. BTW i realized that in the top of the page says no internet connection. I didn't understand the ip problem. I think the dns is the problem and also i configurate the router dns with the google's dns, and i still have not internet access.
     
  6. Demosthenes

    Demosthenes Well-Known Member
    VIP

    Joined:
    16 Apr 2014
    Messages:
    83
    Likes Received:
    53
    Try to static assign your computer.
    If the router ip is 192.168.2.1, with a subnet mask of 255.255.255.0, turn on the DHCP on it, then static assign your computer to:
    IP Address= 192.168.2.55 (should be a safe one)
    Subnet Mask=255.255.255.0 (be sure to set this the same as the router)
    Gateway=192.168.2.1 ( again same as the router)

    DNS=66.42.86.8 (this is mine I know it works)

    disable and re enable your network device and it should work or they do not have internet access.
    Sometimes if WDS is not enabled, or the router does not have it, you cannot get a IP address from it. Ubiquiti is famous for that issue. I have worked with thousands of wifi devices as I used to work for a WISP.
     
  7. xrafael95x

    xrafael95x Member

    Joined:
    18 Jun 2014
    Messages:
    6
    Likes Received:
    0

    thanks bro seems like they don' have internet
     

Share This Page

Loading...