Wireshark 2.6.1 build for TinyPaw compiled against and with new libs: " Wireshark is the world’s foremost and widely-used network protocol analyzer. It lets you see what’s happening on your network at a microscopic level and is the de facto (and often de jure) standard across many commercial and non-profit enterprises, government agencies, and educational institutions. Wireshark development thrives thanks to the volunteer contributions of networking experts around the globe and is the continuation of a project started by Gerald Combs in 1998. " Quoted from project website: https://www.wireshark.org/ Compiled in system with QT - though I said I would prefer GTK - there was some ... build errors spitting out with GTK compile, so QT it is. New libs compiled and used: libcares-1.14.0 libgcrypt-1.8.3 libgpg-error-1.31 gnutls-3.6.2 libpcap-1.8.1 libnl-3.4.0 SourceForge: wireshark-2.6.1-qt.tcz wireshark-2.6.1-qt.tcz.dep libnl-3.4.0.tcz libpcap-1.8.1.tcz gnutls-3.6.2.tcz libgpg-error-1.31.tcz libgcrypt-1.8.3.tcz libcares-1.14.0.tcz BitBucket: wireshark-2.6.1-qt.tcz wireshark-2.6.1-qt.tcz.dep libnl-3.4.0.tcz libpcap-1.8.1.tcz gnutls-3.6.2.tcz libgpg-error-1.31.tcz libgcrypt-1.8.3.tcz libcares-1.14.0.tcz Installation: 1.) Download wireshark and all dep from one of the above repositories. 2.) Copy all downloaded files to your (*/tce/optional/) directory. 3.) Locate your onboot.lst file located in your (*/tce/) directory. 4.) Open your onboot.lst file and make the following adjustments: - add line item: libcares-1.14.0.tcz - add line item: libpcap-1.8.1.tcz - add line item: libnl-3.4.0.tcz - add line item: libgpg-error-1.31.tcz - add line item: libgcrypt-1.8.3.tcz - locate line item: "gnutls-3.6.2.tcz" and move it under the above^ libs in your onboot.lst **ALL ABOVE LIBS^ NEED TO BE PLACED AT THE TOP OF onboot.lst otherwise wireshark will use previous loaded libs used by other tools - ie libgcrypt-1.6.x - etc. SEE PICTURE** - change any line item listings of: "wireshark-2.4.6-gtk.tcz" and change it to: "wireshark-2.6.1-qt.tcz" 5.) Save all changes to your onboot.lst file and close your editor. 6.) Reboot your system and wireshark 2.6.1 with new libs should be ready for use.
