Also read this thread. It contains helpful information. People who ask these types of questions will be ignored by me because I don't like helping lazy people. You will know it when I give you the blind post rating. Sent from my iPhone using Tapatalk
Ralink RT2860 (Asus WL-130N PCI) - is fully working with Xiaopan 0.4.4. Atheros AR9271 (TP-LINK TL-WN722N USB) - as it is mentioned here is working too. What method you have used to set 33dBm TX Power? I have found few variations using iwconfig with BO region, and driver modification method. So while I'm waiting for my ordered AWUS036NHR, I would like to make a memo, which method is 100% working with Xiaopan 0.4.4.
If you have more than one iso in your USB it may or may not boot. I reccomend you format your USB as fat 32 (not quick) and use LiLi USB creator, In Resources thread there is a tuto for it
What a pity! My MultiBootUsb has: title live BackTrack 5 root (hd0,0) kernel /casper/vmlinuz file=/preseed/custom.seed boot=casper initrd /casper/initrd.gz title live wifiway-3.4 map /IMAGE/wifiway-3.4.ISO (0xFF) || map --mem /IMAGE/wifiway-3.4.ISO (0xFF) map --hook chainloader (0xFF) and much more...
If your using YUMMI to multi boot try renaming your iso to tinycore-current and select tiny core as the distro you are adding to your pen drive.
Reformat your USB and reinstall all your distro with YUMI https://xiaopan.co/forums/threads/multiboot-usb-creator.2618/ In less than 10minutes everything will be nicely install again
Sorry couldn't edit my post for some reason, but if you use yumi and changed your iso to tinycore-current you will need to edit multiboot/menu/tinycore.cfg after you installed it to Code: Select All append initrd=/multiboot/tinycore/boot/core.gz loglevel=3 cde to stop the sda write through error, and copy your mydata.tgz and mydatabk.tgz to the root of your pen drive.
Hmm - I downloaded the iso zip file via the torrent and the md5s for the zip file and iso are OK, but the disk won't boot! I get the "isolinux: Found something at drive" etc loop at boot. I use my usual CD disks and burner that I've created loads of bootable disks with, at the slowest speed my drive will do (4x). Gave up after 3 identical problem disks. Any ideas anyone, please? Incidentally, I can't see any dates on posts, so I can't see how old they are. Jim
please help.boot screen comes with lili usb creator. When I start the installation turns out figures standing question marks. What can I do?
What, you mean the first post in this thread - the one that states: "The above links has had reports that it only works live and not in a virtual machine environment" I saw that, but I'm using the iso live, not in a VM. Thanks for the reply. Jim
And... it says " The link below however has been confirmed to work no matter how you use it. I.e: with VM software and those who run it live through USB and CD. " too
I saw that link, but it takes me to a list of hosting sites, none of which I recognise and which also invite me to update my flash player (and possibly install a trojan at the same time!). I think I'll reluctantly give Xiaopan a miss! Thanks for the reply. Jim
Some strange with 0.4.4 ;( 1 in link http://bit.ly/XiaoPan_044 download Xiaopan 0.4.4.zip md5 A30501028D5BE35C54F46745A8C75672 2 in link Mirrorcreator download Xiaopan_0.4.4.zip md5 FF912BE9B0E6E37C81109AEF1DDDB6AD (as described https://xiaopan.co/forums/threads/xiaopan-0-4-4-download.2533/) and in 1 case Xiaopan 0.4.4.iso 73 619 456 bytes 20.01.2013, 23:46:06 md5 91D2BF3D6C955B96A882010927E60667 and in 2 case Xiaopan 0.4.4.iso 73 605 120 bytes 23.01.2013, 17:27:58 also additional info like on this post https://xiaopan.co/forums/threads/xiaopan-0-4-4-download.2533/page-2#post-8117 i can't boot cd 2 Xiaopan 0.4.4.iso 73 605 120 bytes 23.01.2013, 17:27:58 with the same error(under vmware 9.0.1) cd 1 Xiaopan 0.4.4.iso 73 619 456 bytes 20.01.2013, 23:46:06 boot, but its look not like on this post https://xiaopan.co/forums/threads/xiaopan-0-4-4-download.2533/ (without Batman the Dark Knight default wallpaper) pls fix this issue and release for download work version 0.4.4 (0.4.3 - work without any problem)
