Outdated Xiaopan 0.4.4 | Download

Discussion in 'Xiaopan OS' started by Fantasma, 19 Jan 2013.

?

Is this the best Xiaopan ever made? (Before 0.4.5 was made)

  1. Yes

    182 vote(s)
    91.5%
  2. No

    17 vote(s)
    8.5%
Thread Status:
Not open for further replies.
  1. Mr. Penguin

    Mr. Penguin Administrator
    Staff Member VIP Admin

    Joined:
    18 May 2012
    Messages:
    3,093
    Likes Received:
    1,262
    Also read this thread. It contains helpful information. People who ask these types of questions will be ignored by me because I don't like helping lazy people. You will know it when I give you the blind post rating.


    Sent from my iPhone using Tapatalk
     
  2. Fantasma

    Fantasma Well-Known Member

    Joined:
    31 May 2012
    Messages:
    734
    Likes Received:
    437
    And... from now on, by me too
     
  3. Kostja_V

    Kostja_V Well-Known Member
    VIP

    Joined:
    14 Jan 2013
    Messages:
    24
    Likes Received:
    9
    Ralink RT2860 (Asus WL-130N PCI) - is fully working with Xiaopan 0.4.4.
    Atheros AR9271 (TP-LINK TL-WN722N USB) - as it is mentioned here is working too.


    What method you have used to set 33dBm TX Power? I have found few variations using iwconfig with BO region, and driver modification method. So while I'm waiting for my ordered AWUS036NHR, I would like to make a memo, which method is 100% working with Xiaopan 0.4.4.
     
  4. Wanderer

    Wanderer New Member

    Joined:
    23 Jan 2013
    Messages:
    6
    Likes Received:
    0
    How to run a graphic interface?
    En BackTrack is a command "startx".
     
  5. Fantasma

    Fantasma Well-Known Member

    Joined:
    31 May 2012
    Messages:
    734
    Likes Received:
    437
    How are you running it, Live CD/USB VM ?
     
  6. Wanderer

    Wanderer New Member

    Joined:
    23 Jan 2013
    Messages:
    6
    Likes Received:
    0
    Multi Boot USB
     
  7. Fantasma

    Fantasma Well-Known Member

    Joined:
    31 May 2012
    Messages:
    734
    Likes Received:
    437
    If you have more than one iso in your USB it may or may not boot. I reccomend you format your USB as fat 32 (not quick) and use LiLi USB creator, In Resources thread there is a tuto for it ;)
     
  8. Wanderer

    Wanderer New Member

    Joined:
    23 Jan 2013
    Messages:
    6
    Likes Received:
    0
    What a pity! My MultiBootUsb has:

    title live BackTrack 5
    root (hd0,0)
    kernel /casper/vmlinuz file=/preseed/custom.seed boot=casper
    initrd /casper/initrd.gz

    title live wifiway-3.4
    map /IMAGE/wifiway-3.4.ISO (0xFF) || map --mem /IMAGE/wifiway-3.4.ISO (0xFF)
    map --hook
    chainloader (0xFF)
    and much more...
     
  9. Fantasma

    Fantasma Well-Known Member

    Joined:
    31 May 2012
    Messages:
    734
    Likes Received:
    437
    Use a different pendrive :p
     
  10. meknb

    meknb Mod
    Moderator Dev Team VIP

    Joined:
    2 Jun 2012
    Messages:
    702
    Likes Received:
    202
    If your using YUMMI to multi boot try renaming your iso to tinycore-current and select tiny core as the distro you are adding to your pen drive.
     
  11. estimacamry

    estimacamry Tracker
    VIP

    Joined:
    3 Aug 2012
    Messages:
    556
    Likes Received:
    163
  12. meknb

    meknb Mod
    Moderator Dev Team VIP

    Joined:
    2 Jun 2012
    Messages:
    702
    Likes Received:
    202
    Sorry couldn't edit my post for some reason, but if you use yumi and changed your iso to tinycore-current you will need to edit multiboot/menu/tinycore.cfg after you installed it to
    Code:
    Select All
    append initrd=/multiboot/tinycore/boot/core.gz loglevel=3 cde
    to stop the sda write through error, and copy your mydata.tgz and mydatabk.tgz to the root of your pen drive.
     
  13. Jim Ford

    Jim Ford New Member

    Joined:
    26 Jan 2013
    Messages:
    3
    Likes Received:
    0
    Hmm - I downloaded the iso zip file via the torrent and the md5s for the zip file and iso are OK, but the disk won't boot!

    I get the "isolinux: Found something at drive" etc loop at boot. I use my usual CD disks and burner that I've created loads of bootable disks with, at the slowest speed my drive will do (4x). Gave up after 3 identical problem disks.

    Any ideas anyone, please?

    Incidentally, I can't see any dates on posts, so I can't see how old they are.

    Jim
     
  14. MrZouis

    MrZouis Active Member

    Joined:
    16 Jan 2013
    Messages:
    1
    Likes Received:
    0
    how to use this on oracle virtualbox ????
     
  15. burak_yksl_88

    burak_yksl_88 Active Member

    Joined:
    14 Aug 2012
    Messages:
    1
    Likes Received:
    0
    please help.boot screen comes with lili usb creator. When I start the installation turns out figures standing question marks. What can I do?
     
  16. Fantasma

    Fantasma Well-Known Member

    Joined:
    31 May 2012
    Messages:
    734
    Likes Received:
    437
    Check the main post, at bottom there is a RED NOTE which will help you
     
  17. Jim Ford

    Jim Ford New Member

    Joined:
    26 Jan 2013
    Messages:
    3
    Likes Received:
    0
    What, you mean the first post in this thread - the one that states:

    "The above links has had reports that it only works live and not in a virtual machine environment"

    I saw that, but I'm using the iso live, not in a VM.

    Thanks for the reply.

    Jim
     
  18. Fantasma

    Fantasma Well-Known Member

    Joined:
    31 May 2012
    Messages:
    734
    Likes Received:
    437
    And... it says " The link below however has been confirmed to work no matter how you use it. I.e: with VM software and those who run it live through USB and CD. " too :D
     
  19. Jim Ford

    Jim Ford New Member

    Joined:
    26 Jan 2013
    Messages:
    3
    Likes Received:
    0
    I saw that link, but it takes me to a list of hosting sites, none of which I recognise and which also invite me to update my flash player (and possibly install a trojan at the same time!). I think I'll reluctantly give Xiaopan a miss!

    Thanks for the reply.

    Jim
     
  20. Neohunter

    Neohunter Member

    Joined:
    9 Dec 2012
    Messages:
    2
    Likes Received:
    0
    Some strange with 0.4.4 ;(
    1 in link http://bit.ly/XiaoPan_044
    download Xiaopan 0.4.4.zip
    md5 A30501028D5BE35C54F46745A8C75672
    2 in link Mirrorcreator
    download Xiaopan_0.4.4.zip
    md5 FF912BE9B0E6E37C81109AEF1DDDB6AD (as described https://xiaopan.co/forums/threads/xiaopan-0-4-4-download.2533/)
    and in 1 case Xiaopan 0.4.4.iso 73 619 456 bytes 20.01.2013, ‏‎23:46:06
    md5 91D2BF3D6C955B96A882010927E60667
    and in 2 case Xiaopan 0.4.4.iso 73 605 120 bytes 23.01.2013, ‏‎17:27:58
    also additional info
    like on this post https://xiaopan.co/forums/threads/xiaopan-0-4-4-download.2533/page-2#post-8117
    i can't boot cd 2 Xiaopan 0.4.4.iso 73 605 120 bytes 23.01.2013, ‏‎17:27:58 with the same error(under vmware 9.0.1)

    cd 1 Xiaopan 0.4.4.iso 73 619 456 bytes 20.01.2013, ‏‎23:46:06
    boot, but its look not like on this post
    https://xiaopan.co/forums/threads/xiaopan-0-4-4-download.2533/
    (without Batman the Dark Knight default wallpaper)

    pls fix this issue and release for download work version 0.4.4
    (0.4.3 - work without any problem)
     

    Attached Files:

Thread Status:
Not open for further replies.

Share This Page

Loading...